You are here: Military Bags » Tag: Mil spec bags

Tag Archive for: Mil spec bags

CADPAK P

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 CLASS 1

MILITARY SPECIFICATION
FILM: MIL PRF 131 C1
POUCH: MIL DTL 117 T1 CE S1
Exterior: 90ga OPP
Recommended Sealing Conditions:
Temperature 400 °F | Pressure 40 PSI | Dwell 1 SEC

 

Barrier Material: Water vapor proof, Greaseproof, Flexible, Heat Sealable, Class 1

Application:

Cadpak PL is a light duty Foil Barrier film used where very low oxygen and moisture levels are required. It is silver in color with red Mil Spec printing. It is used extensively in military applications where a cost-effective, light duty, high barrier material is required. Typical uses are vacuum crating and pouches for moisture/oxygen sensitive items. Product protection inside export crating is another common application for this film.

Converting:

Cadpak PL can be converted in many ways: 2-seal pouch, 3-seal pouch, side gusset, stand up pouch and tubing. Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper ASTM D2103 mils 3.2
Yield (Nominal) Calculated in²/lb 8190
MVTR ASTM F1249 g/100 in²/day @90% RH 40 °C .0005
OTR ASTM D3985 cc/100 in²/day @0% RH, 23 °C .0005
Puncture MIL STD 3010 lbs 18
Tensile Strength ASTM D882 lbs/inch 20
Breaking Strength MIL STD 3010 lbs/ (grab method) 70
Seal Strength ASTM F88 lbs/in 10

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

CADPAK T

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 CLASS 1

MILITARY SPECIFICATION
FILM: MIL PRF 131 C1
POUCH: MIL DTL 117 T1 CE S1
Exterior: Tyvek
Recommended Sealing Conditions:
Temperature 375 °F | Pressure 40 PSI | Dwell 1 SEC

 

Barrier Material: Water vapor proof, Greaseproof, Flexible, Heat-Sealable, Class 1

Application:

This Heavy Duty white film is one of the strongest mil spec films that Shannon carries. The Tyvek exterior layer provides the strength, the foil layer provides the barrier, and the Poly layer enables it to be heat-sealable. A typical application is for large bags that must carry a heavy load. The film does not stretch and is very strong.

Converting:

Film is converted in many ways: 2-seal pouch, 3-seal pouch,stand up pouch and tubing.
Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper ASTM D2103 mils 9.1
Yield (Nominal) Calculated in²/lb 4740
Puncture Resistance MIL-STD-3010D lbs 17
Breaking Strength MD MIL PRF 131K lbs 71
Breaking Strength TD MIL PRF 131K lbs 82
Tensile Strength MD ASTM D882 PSI 5300
Tensile Strength TD ASTM D882 PSI 5200
Elongation MD ASTM D882 % 625
Elongation TD ASTM D822 % 675
Tear Strength MD ASTM D1922 Grams 4100
Tear Strength TD ASTM D1922 Grams >6400
OTR ASTM D3985 cc/100 in²/day @0% RH, 23 °C .0005
MVTR ASTM F1249 g/100 in²/day @90% RH 40 °C .0005
COF (Sealant to sealant) ASTM D1894 Kinetic
Seal Strength ASTM F88 Lbs/in 15

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

CADPAK PL

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 CLASS 1

MILITARY SPECIFICATION
FILM: MIL PRF 131 C1
POUCH: MIL DTL 117 T1 CE S1
Exterior: 90ga OPP
Recommended Sealing Conditions:
Temperature 400 °F | Pressure 40 PSI | Dwell 1 SEC

 

Barrier Material: Water vapor proof, Greaseproof, Flexible, Heat Sealable, Class 1

Application:

Cadpak PL is a light duty Foil Barrier film used where very low oxygen and moisture levels are required. It is silver in color with red Mil Spec printing. It is used extensively in military applications where a cost-effective, light duty, high barrier material is required. Typical uses are vacuum crating and pouches for moisture/oxygen sensitive items. Product protection inside export crating is another common application for this film.

Converting:

Cadpak PL can be converted in many ways: 2-seal pouch, 3-seal pouch, side gusset, stand up pouch and tubing. Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper ASTM D2103 mils 3.2
Yield (Nominal) Calculated in²/lb 8190
MVTR ASTM F1249 g/100 in²/day @90% RH 40 °C .0005
OTR ASTM D3985 cc/100 in²/day @0% RH, 23 °C .0005
Puncture MIL STD 3010 lbs 18
Tensile Strength ASTM D882 lbs/inch 20
Breaking Strength MIL STD 3010 lbs/ (grab method) 70
Seal Strength ASTM F88 lbs/in 10

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

FR2175

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 CLASS 1 – FFP

MILITARY SPECIFICATION
FILM: MIL PRF 131 C1 – FFP
POUCH: MIL DTL 117 T1 CE S1
Exterior: Foil
Recommended Sealing Conditions:
Temperature 375 °F | Pressure 26 PSI | Dwell 1 SEC

Barrier Material: Water vapor proof, Greaseproof, Flexible, Heat-Sealable, Class 1

Application:

FR-2175B is a foil barrier material used where very low oxygen and moisture levels are required. It is silver in color with red Mil Spec printing. It is used extensively in military applications where a cost-effective, strong, high barrier material is required. This FDA approved material is also available without the Mil Spec and is therefore unprinted (FFP500).

Converting:

It can be converted in many ways: 2-seal pouch, 3-seal pouch, side gusset, stand up pouch and tubing. Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole. The FFP500 can also be surface printed or reverse-trapped printed. It is available in web widths to 60”

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper mils 5.0
Yield sq.in/lb 5400
MVTR Mocon gms/100² in./24 hrs .0006
OTR Mocon CC/100² in./24 hrs .0006
Tensile MD ASTM D882 Lbs. at break 34
Tensile XMD ASTM D882 LBS. at break 29
Tear MD ASTM 689 Grams 64
Team XMD ASTM D689 Grams 64
Alum. Pinholes Pinholes/ft² 100

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

CADPAK S

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 CLASS 3

MILITARY SPECIFICATION
FILM: MIL PRF 131 C3
POUCH: MIL DTL 117 T4 CE S1
Exterior: Poly Cotton Scrim
Recommended Sealing Conditions:
Temperature 435 °F | Pressure 60 PSI | Dwell 3 SEC

 

Barrier Material: Water vapor proof, Greaseproof, Flexible, Heat-Sealable, Class 3

Application:

Cadpak S is a heavy duty foil Barrier film used where very low oxygen and moisture levels are required. It is white in color and the film has red Mil Spec printing on exterior white layer. It is used extensively in military applications where a cost-effective, heavy duty, high barrier material is required. Typical uses are vacuum crating and pouches for moisture/oxygen sensitive items. Product protection inside export crating is another common application for this film.

Converting:

Cadpak S can be converted in many ways: 2-seal pouch, 3-seal pouch, side gusset, stand up pouch and tubing. Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper ASTM D2103 mils 13.3
Yield (Nominal) Calculated in²/lb 3270
MVTR ASTM F1249 g/100 in²/day @90% RH 40 °C .0005
OTR ASTM D3985 cc/100 in²/day @0% RH, 23 °C .0005
Puncture MIL STD 3010 lbs >22
Tensile Strength ASTM D882 lbs/inch 53
Seal Strength ASTM F88 lbs/in 10

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

FR2194

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 81705 T1

MILITARY SPECIFICATION
FILM: MIL PRF 81705 T1
POUCH: MIL DTL 117 T1 CE S1
Exterior: 92ga Metalized PET
Recommended Sealing Conditions:
Temperature 400 °F | Pressure 40 PSI | Dwell 1 SEC

 

Antistatic Metalized PET / Foil / A.S. Black PE blend

Application:

This moisture barrier film meets the MIL PRF81705 Type 1 specifications as it appears on the Navy Qualified Products List (QPL) for low MVTR and maximum physical strength. It provides full protection from ESD, static fields and tribo charging. The film is strong and light weight and is suitable for vacuum packaging with nitrogen flushing

Converting:

It is usually converted into sheeting, tubing, and 2-seal pouches with Faraday Cage.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper mils 3.25
Yield sq.in/lb 7200
MVTR Mocon gms/100² in./24 hrs .0006
OTR Mocon CC/100² in./24 hrs .0006
Puncture Fed TM 2065 lbs 19
Surface resistivity ASTM-257 Ohms/Sq. Outer 10³
Surface resistivity ASTM-257 Ohms/Sq. Inner 107
Charge Dissipation Fed TM 4046 Seconds .01-.02
Tensile MD ASTM D882 Lbs. at break 34
EMI Attenuation MIL B-81705 dB 38.8
Static Shielding ELA-541 Volts -2+3V
Tear MD ASTM 689 Grams 70
Tear XMD ASTM 689 Grams 70

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

FR5500

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 22191 T2

MILITARY SPECIFICATION
FILM: MIL PRF 22191 T2
POUCH: MIL DTL 117 T2 CC S2
Exterior: 48ga PET
Recommended Sealing Conditions:
Temperature 350 °F | Pressure 40 PSI | Dwell 1 SEC

 

Physical Description
Laminated PET/LLDPE

Application:

This clear mil spec film has moderate oxygen and moisture vapor transition rates. The Polyester layer makes this film non-extensible while the Poly layer enables it to be heat-sealable. The film does not stretch and tears nicely at the tear notch. The film has blue lettering on it denoting the manufacturer and military specification. This film is also available without the mil specification (clear – no lettering) for non-military applications

Converting:

Film is usually converted into sheeting, tubing, 2-seal pouches, and 3-seal pouches.

Physical Properties:

Tensile XMDASTM D882Lbs. at break17

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper mils 3.0
Yield sq.in/lb 9113
MVTR Mocon gms/100² in./24 hrs .03
OTR ATTM-11434-66 CC/100² in./24 hrs 9.0
Burst Mullen Psi 50
Tensile MD ASTM D882 Lbs. at break 18
Tear MD ASTM 689 Lbs at break 50
Tear XMD ASTM 689 Lbs at break 50

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

MS360

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 C1

MILITARY SPECIFICATION
FILM: MIL PRF 131 C1
POUCH: MIL DTL 117 T1 CE S1
Exterior: .6mil BON
Recommended Sealing Conditions:
Temperature 350 °F | Pressure 40 PSI | Dwell 1.5 SEC

 

Barrier Materials: Water vapor proof, Greaseproof, Flexible, Heat-Sealable, Class 1

Application:

MS360 is a Nylon foil barrier material used where very low oxygen and moisture levels are required. It is silver in color with red Mil Spec printing. It is used extensively in military applications where a cost-effective, strong, high barrier material is required. This material is also available without the Mil Spec and is therefore unprinted (NFP520 nomenclature). The NFP520 can also be surface printed or reverse-trapped printed. It is available in web widths to 60”

Converting:

Film is converted in many ways: 2-seal pouch, 3-seal pouch,stand up pouch and tubing.
Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper TAPPI T411 mils 5.2
Yield sq.in/lb 5253
MVTR ASTM F1249 g/100 in²@90% RH 40 C .0006
OTR ASTM D3985 CC/100 sq.in./24 hrs .0006
Burst TAPPI T403 Psi 70
Tensile MD TAPPI T494 Lbs. at break 27
Tensile CD TAPPI T494 Lbs at break 26
Tear MD TAPPI T414 Lbs at break 155
Tear CD TAPPI T414 Lbs at break 100
Alum Pin Holes Pinhole/ft² 100

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

MS585

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 C1

MILITARY SPECIFICATION
FILM: MIL PRF 131 C1
POUCH: MIL DTL 117 T1 CE S1
Exterior: Tyvek
Recommended Sealing Conditions:
Temperature 400 °F | Pressure 40 PSI | Dwell 2 SEC

 

Barrier Materials: Water vapor proof, Greaseproof, Flexible, Heat-Sealable, Class 1

Application:

This Heavy Duty white film is one of the strongest mil spec films that Shannon carries. The Tyvek exterior layer provides the strength, the foil layer provides the barrier, and the Poly layer enables it to be heat-sealable. It is typically specified for large bags that must carry a heavy load. The film does not stretch and is very strong. This film conforms to FDA regulations Part 177.1520 CFR 21.

Converting:

Film is converted in many ways: 2-seal pouch, 3-seal pouch,stand up pouch and tubing.
Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper mils 8.5
Yield sq.in/lb 4885
MVTR ASTM F1249 g/100 in²@90% RH 40 C .0006
OTR ASTM D3985 CC/100 sq.in./24 hrs .0006
Burst TAPPI T403 Psi 142
Tensile MD TAPPI T494 Lbs. at break 40
Tensile CD TAPPI T494 Lbs at break 38
Tear MD TAPPI T414 Lbs at break 45
Tear CD TAPPI T414 Lbs at break 55

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

MS1311

pdf 15 Aug 2012 0 Comments Tags: , , , , , , , , , , ,

MIL PRF 131 C3

MILITARY SPECIFICATION
FILM: MIL PRF 131 C3
POUCH: MIL DTL 117 T4 CE S1
Exterior: Scrim Cotton
Recommended Sealing Conditions:
Temperature 500 °F | Pressure 60 PSI | Dwell 2 SEC

 

Barrier Materials: Water vapor proof, Greaseproof, Flexible, Heat-Sealable, Class 3

Application:

MS1311 is a heavy duty foil Barrier film used where very low oxygen and moisture levels are required. It is white in color and the film has red Mil Spec printing on exterior white layer. It is used extensively in military applications where a cost-effective, heavy duty, high barrier material is required. Typical uses are vacuum crating and pouches for moisture/oxygen sensitive items. Product protection inside export crating is another common application for this film. The MS1311 Conforms to FDA regulations Part 177.1520 CFR21.

Converting:

MS1311 can be converted in many ways: 2-seal pouch, 3-seal pouch,
stand up pouch and tubing. Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper ASTM D2103 mils 15
MVTR ASTM F1249 g/100 in²@90% RH 40 °C .0005
OTR ASTM D3985 CC/100 in²/day @0% RH 23 °C .0005
Burst TAPPI T403 Psi 58
Tensile MD TAPPI T494 Lbs. at break 20
Tensile CD TAPPI T494 Lbs at break 20

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

Pages

Categories

Archive

© Copyright - Military Bags